STEP 1 Consultation / Allergy Test / Hair Strength Test

During the consultation, we conduct a detailed interview with the client to gather information about any prior chemical treatments performed on the hair (this information is essential to determine the correct parameters for the treatment).

We also provide detailed information about proper aftercare following the treatment. The allergy test should ideally be conducted 24 hours before the scheduled treatment. We apply the product to the back of the head near the hairline on the neck.

If an allergic reaction occurs (severe redness, itching), the product must be immediately thoroughly rinsed with lukewarm water, and the styling treatment should be avoided.

However, it is important to note that the products contain acids that may be felt on the skin as a slight tingling sensation. The hair strength test is performed on wet hair. By gently stretching small amounts of wet hair strands, we can check if the hair is structurally damaged (multiple different test locations should be chosen).

If the hair curls or breaks during stretching, the styling treatment should be avoided. For severely damaged hair, we can only suggest trimming the most damaged parts and applying an appropriate hair regeneration treatment such as our Botox.

STEP 2 Select the correct product according to the table below:

NanoGold - All hair types, All curl types, Bleached, Colored (light and dark), Natural

NanoBlue - All hair types, All curl types, Colored (dark), Natural

Hybrid Form (NanoGold + NanoBlue) - Hair in need of toning, Dark blonde to black colored hair – individually tailored ratios, Light blonde bleached hair - max 50%, Nano Blue due to the purple-blue pigments that can permanently change hair color.

Nanoplex - Product to support working with dry and weak hair, Add to the mixture in the following proportions: 5g per 100g mixture for natural hair, 10g per 100g mixture for colored hair, 15g per 100g mixture for colored hair.

Note! Nanoplastia treatment can lighten colored hair up to 3 shades.

STEP 3 Determine the product's exposure time on the hair and styling parameters according to the table below:

Note! A good titanium flat iron is required for the treatment to maintain a consistent temperature. It is also helpful to have two sizes of flat irons: one with wide plates (4.5-6 cm) and one with smaller plates (approximately 2.5 cm) for shorter hair sections such as bangs.

STEP 4 Hair Washing:

Before washing for the treatment, we recommend using a strong cleansing shampoo (with an alkaline pH), such as our Golden Purify shampoo. Distribute a small amount of shampoo in the hands and apply it to wet hair. Massage until the hair feels rough (the hair cuticles will open), then rinse. Repeat this step once more. Finally, remove excess water with a disposable towel.

Note! If working with hair in a weaker condition, it is recommended to apply Pre Nano Botox at this time to prepare the hair for the styling treatment.

STEP 5 Drying (choosing the right humidity level):

Pre-combed hair is dried with a hairdryer - we maintain humidity levels according to the instructions:

Natural hair: completely dry

Colored hair: retain 15% humidity

Bleached hair: retain 30% humidity. If the hair dries during the treatment, we moisten the strands with water from a sprayer.

STEP 6 Product Preparation:

Prepare the correct mixture according to the table (Refer to Step 2). Due to the organic components, the Nanoplasty bottle must be shaken thoroughly to mix all ingredients well (this is crucial for the product to work effectively). When creating the hybrid mixture and adding Nano Plex, products should be thoroughly mixed until they achieve a uniform consistency.

STEP 7 Product Application:

Work on horizontal sections of 1-2 cm thickness (the thicker the hair, the smaller the section). Apply the product 1 cm away from the hair roots to the tips. For strongly curled hair, try to apply the product as close to the scalp as possible (ensure an allergy test is conducted first). Apply the product generously to ensure even coverage of the hair.

STEP 8 Product Exposure Time on Hair:

Use according to the table (Refer to Step 3), paying specific attention to the condition, hair type, and curl.

STEP 9 Removing Excess Product from Hair:

After completing the product's exposure time on the hair, remove excess product with a disposable towel, spraying wider sections of hair with water from a sprayer and massaging thoroughly until the product comes off.

STEP 10 Drying:

The drying process takes quite some time, which is a normal phenomenon due to the large amount of moisturizing substances, oils, and butters in the products. However, it must be done carefully to remove all moisture from the hair so that it is not damaged by the heat of the flat iron during the next step (styling).

STEP 11 Styling:

After drying, divide the hair into sections. Ensure you use a flat iron with titanium plates for styling. Adjust the temperature and number of passes according to the table (Refer to Step 3), taking into consideration the condition, hair type, and curl. Work with thin hair sections of 1-2 cm width from the flat iron plates. Gently and thoroughly press the product in with smooth movements until the hair has a shiny appearance, following the established number of passes. Wait for 3 minutes until the last styled sections have cooled before proceeding with the final wash.

Note! During styling, monitor the hair's texture. If the hair starts to appear dull, stop styling that section.

STEP 12 Hair Washing:

For the final washing, we use Nano Gold and Nano Blue Homecare products (shampoo and mask) for at-home care. We wash the hair twice to thoroughly remove all product residues. Blot excess moisture with a disposable towel and apply a hydrating mask for 10 minutes. Rinse the product thoroughly with lukewarm water.

STEP 13 Drying:

Drying the hair should be done with a hairdryer with warm or lukewarm air (avoid hot air), while regularly brushing the hair from the roots to the tips. It is advisable to provide the client with proper instructions during drying.

AQUA, CETEARYL ALCOHOL, POLYQUATERNIUM-7, MINERAL OIL , CETRIMONIUM CLHORIDE, CETEARYL ALCOHOL (AND) BEHENTRIMONIUM METHOSULFATE, SHEA BUTTER, HYDROLYZED KERATIN, GLYOXYLIC ACID, MICA GOLD, STEARAMIDOPROPYL DIMETHYLAMINE, COCOS NUCIFERA SEED BUTTER, PARFUM, Urea, Hydrolyzed Corn Protein, Guar Hydroxypropyltrimonuim Chloride, Pantothenic Acid (vitamin B5), Riboflavin (vitamin B2), Acetamide MEA, Histidine, ,Arginine  , Lysine , Cyclopentasiloxane, PEG 90 m , Sodium hyaluronate , lacid acid , Cyclopentasiloxane

Aqua (Water): The main solvent in most hair care products, allowing other ingredients to be easily distributed.

Cetearyl Alcohol: An emollient and emulsifier that helps to moisturize the hair and hold the product's ingredients together.

Polyquaternium-7: An anti-static ingredient that helps in detangling the hair, making it softer, and preventing dirt buildup.

Mineral Oil (Mineral Oil): Moisturizes and softens the hair by creating a protective layer on the surface.

Cetrimonium Chloride: An anti-static and emulsifying ingredient, helps soften hair and facilitates combing.

Cetearyl Alcohol and Behentrimonium Methosulfate: Emulsifiers that help combine the water and oil ingredients in the product, and also to soften the hair and facilitate combing.

Shea Butter (Shea Butter): A nourishing and moisturizing ingredient that softens hair and gives it shine.

Hydrolyzed Keratin (Hydrolyzed Keratin): A protein that strengthens hair, gives it shine, and helps with regeneration.

Glyoxylic Acid (Glyoxylic Acid): Can help straighten hair by changing its structure.

Mica Gold (Gold Mica): Gives hair shine and shine.

Stearamidopropyl Dimethylamine: An emollient and conditioning ingredient that helps in detangling and moisturizing the hair.

Cocos Nucifera Seed Butter (Coconut Seed Butter): Coconut butter that helps moisturize the hair and gives it shine.

Parfum: Gives the product a scent.

Urea (Urea): A moisturizing and exfoliating ingredient that helps maintain a healthy scalp.

Hydrolyzed Corn Protein (Hydrolyzed Corn Protein): Corn protein that can moisturize and strengthen the hair.

Guar Hydroxypropyltrimonium Chloride: A thickening and conditioning substance that helps soften hair and facilitate combing.

Pantothenic Acid (Vitamin B5), Riboflavin (Vitamin B2): Vitamins that can help strengthen hair and skin.

Acetamide MEA: A moisturizing and softening ingredient that helps maintain hair health.

Histidine: An amino acid that helps strengthen the hair structure and possibly helps protect against damage.

Arginine: An amino acid that improves blood circulation in the scalp, which supports hair growth.

Lysine: An amino acid that can help strengthen hair and prevent hair loss.

Cyclopentasiloxane: A silicone that helps smooth and protect hair, making it shinier.

PEG 90M: An emulsifier that helps maintain a balance between water and oil ingredients.

Sodium Hyaluronate (Hyaluronic Acid Sodium Salt): A salt of hyaluronic acid, a powerful moisturizer that helps keep hair hydrated and healthy.

Lactic Acid (Lactic Acid): A pH regulator, helps to moisturize and soften hair.

Cyclopentasiloxane: A silicone that helps smooth and protect hair, making it shinier. (Repeated ingredient)

Additional NanoBLue ingredient: Acid Violet 43: This is a synthetic dye often used in hair care products, particularly those intended to neutralize unwanted yellow tones in blonde hair or accentuate purple and pink tones. It contains sulfate groups that form ionic bonds with the keratin protein in the hair, preserving color.